-
Features
- Operation Process
- Connect the actuator to the Velocity Check Valve outlet/ sensor inlet loop, open the actuator, and close the isolate valve on the low-pressure sensor inlet port. Push the Velocity Check Valve handle, when the actuator fully open and the
pressure are stabilize in the system loop, release the handle. When the pressure in the normal operating range, open the isolate valve on the low-pressure sensor inlet port to put the system in the automatic operation model.
-
Specification
- Working Media
- Oil
- Max Working Pressure
- Sensing Port: 10,000PSI (689.655bar)
Control Port: 6,000PSI (413.793bar)
- Temperature Range
- – 30°C to 120°C
Other Temperature Ranges available. Consult Factory
- Material (Valve Body)
- 316 L
- Net Weight
- 6.0 kg
- Seal Material
- Nitrile Rubber(NBR)
Other Seal Material are Available Upon Request
- Flow Rate
- Cv = 0.16
- System Components
- High Pressure Sensor (NC)
Low Pressure Sensor (NO)
Manifold Pilot Base
Velocity Check Valve (Manual)
Isolate Valve (Start-up)
- Option Components
- Needle valve (Calibration Port)
- Tubing Connection
- 3/8″OD x 0.065(Standard)
3/8″OD x 0.049 (Other Options available)
- Sensor Connection
- Sensor Port:1/2″-14NPT M
Control Port:1/4″-18NPT F
